If you’re looking for ways to install a water bottle cage on your bike without drilling any holes, there are a few options available to you. One is to use a water bottle cage that mounts to your bike frame using Velcro straps.
Another is to use a water bottle cage that attaches to your handlebars or seat post with a clamp.
If you’re looking for a water bottle cage that’s easy to install and remove, a Velcro strap-on water bottle cage is a good option.
These water bottle cages typically have two straps that wrap around your bike frame and are secure with a Velcro closure. Some models also have a third strap that goes over the top of the water bottle to keep it from falling out.
Clamp-on water bottle cages are another option for installing a water bottle cage without drilling holes. These water bottle cages attach to your bike frame or handlebars with a clamp.
Some models have a quick release mechanism that makes it easy to remove the water bottle cage when you need to fill up your bottle.
In this article, you will learn how to install water bottle cage on bike without holes.
Ways To Install Water Bottle Cage On Bike Without Holes
If you’re looking to add a water bottle cage to your bike but don’t have any frame mounting holes, there are a few different ways to do it.
Here are 9 ways to install a water bottle cage on a bike without holes:
- Way 1: Use a zip tie
- Way 2: Use velcro straps
- Way 3: Use a handlebar mount
- Way 4: Use a seatpost mount
- Way 5: Use a fender mount
- Way 6: Use a fork mount
- Way 7: Use a bottle cage adapter
- Way 8: Use a frame bag
- Way 9: Use a chainstay mount
Way 1: Use a zip tie
If your frame doesn’t have any mounting holes, you can use a zip tie to attach the cage to the frame. Just thread the zip tie through the cage and around the frame, and then tighten it down. You may need to use a few zip ties to make sure the cage is secure.
Way 2: Use velcro straps
Another option is to use velcro straps to attach the cage to the frame. Just wrap the velcro around the frame and through the cage, and then tighten it down.
Way 3: Use a handlebar mount
If you have a handlebar mount for a water bottle cage, you can use that to attach the cage to the frame. Just thread the handlebar mount through the cage and around the frame, and then tighten it down.
Way 4: Use a seatpost mount
If you have a seatpost mount for a water bottle cage, you can use that to attach the cage to the frame. Just thread the seatpost mount through the cage and around the frame, and then tighten it down.
Way 5: Use a fender mount
If you have a fender mount for a water bottle cage, you can use that to attach the cage to the frame. Just thread the fender mount through the cage and around the frame, and then tighten it down.
Way 6: Use a fork mount
If you have a fork mount for a water bottle cage, you can use that to attach the cage to the frame. Just thread the fork mount through the cage and around the frame, and then tighten it down.
Way 7: Use a bottle cage adapter
If you have a bottle cage adapter, you can use that to attach the cage to the frame. Just thread the adapter through the cage and around the frame, and then tighten it down.
Way 8: Use a frame bag
If you have a frame bag, you can use that to attach the cage to the frame. Just thread the bag through the cage and around the frame, and then tighten it down.
Way 9: Use a chainstay mount
If you have a chainstay mount for a water bottle cage, you can use that to attach the cage to the frame. Just thread the chainstay mount through the cage and around the frame, and then tighten it down.
How To Install Water Bottle Cage On Bike Without Holes? [6 Easy Steps]
If you’re looking to add a water bottle cage to your bike but don’t have any mounting holes, there are a few ways to do it.
You can use zip ties, velcro straps, or even duct tape to secure the cage in place. Just make sure that it’s mounted in a spot that’s easy to reach so you can stay hydrated on your rides.
Here’s a step-by-step guide on how to install a water bottle cage on a bike without mounting holes:
- Step 1: Choose a spot for the cage. It should be close to the handlebars so you can reach it easily.
- Step 2: Clean the area where the cage will be mounted. This will help the cage stay in place better.
- Step 3: Wrap a few turns of duct tape around the frame where you want to mount the cage.
- Step 4: Place the cage on the duct tape and press it firmly into place.
- Step 5: Wrap more duct tape around the cage to secure it.
- Step 6: Trim the excess tape with a knife or scissors.
And that’s it! Your water bottle cage is now securely mounted on your bike without the need for mounting holes.
If you’re worried about the cage moving around, you can also use zip ties or velcro straps to further secure it in place. Just make sure that the cage is still mounted in a spot that’s easy to reach so you can stay hydrated on your rides.
Where Should You Install a Water Bottle Cage on a Bike?
Most bottle cages are installed on the down tube of the bicycle frame, near the bottom bracket. However, there are a few different places a bottle cage can be installed on a bicycle, depending on your preference.
The down tube is the most common place to install a bottle cage on a bicycle. This is because it is the easiest place to reach while riding and does not get in the way of other bike components.
Another option is to install the bottle cage on the seat tube. This is a good option if you don’t want the bottle cage to get in the way of your legs while pedaling.
You can also install the bottle cage on the handlebars. This is a good option if you want to be able to see the bottle cage while pedaling.
Finally, you can install the bottle cage on the top tube. This is a good option if you don’t want the bottle cage to get in the way of your legs while pedaling.
Regardless of where you choose to install the bottle cage, make sure it is securely fastened and that the cage is the right size for your bottle.
Best Place To Put Water Bottle On Bike
There are a few things to consider when deciding where to place your water bottle on your bike. First, you want to make sure it is easily accessible so you can drink it when you need it. Second, you want to make sure it is securely mounted so it doesn’t fall off and get lost or damaged.
A popular option is to mount the canister on the down tube, just behind the steerer tube. This position puts it within easy reach and also keeps it out of the way of your feet as you pedal.
Best Water Bottle Cage For Bike Without Holes
There are many different bottle cages on the market, but they are not all the same. Some bottle cages are made specifically for road bikes, while others are more suitable for mountain bikes.
And then there are bottle cages that are designed to work with both types of bikes. If you’re looking for the best water bottle cage for both road and mountain bikes, then you need to check out the SKS-Germany Cage.
The SKS-Germany Cage is made of plastic and has a sleek design that looks great on any bike. But the best part of the SKS-Germany Cage is that it is designed to keep bottles in place, even on the roughest terrain.
The SKS-Germany Cage has a two-strap mounting system that makes it easy to install, and it also has a built-in rubber liner that helps keep your bottles in place.
If you’re looking for a bottle cage that can withstand the rigors of road and mountain biking, then the SKS-Germany Cage bottle cage is the perfect choice for you.
Bottom line
It is possible to install a water bottle cage on a bike without holes, though it may take some creativity. There are a few different ways to do this, such as using velcro or zip ties.
The most important thing to remember when installing a water bottle cage without holes is to make sure it is secure. This is especially important if you are using velcro or zip ties, as they may not be as strong as a traditional mounting system. If the cage isn’t secure, it could come loose while you’re riding, which could be dangerous.
