If you’re like most people, you probably bought a Giant bike because you were impressed by its quality. Giant is one of the world’s leading bicycle manufacturers, known for its innovative designs and high-quality craftsmanship.
One of the nice things about Giant bikes is that they are very adjustable, so you can customize them to suit your riding style and preferences. If you find that the handlebars are too low for your comfort, it’s easy to raise them. In this blog post, we’ll show you how to do it.
Can You Raise The Handlebars On A Giant Bike?
Yes, you can raise the handlebars, but it’s not as simple as adding a stem with a steeper angle. You’ll also have to reverse your current stem so that it points up instead of down.
The reason you need to do this is that the handlebars on Giant bikes are designed to be at a certain height relative to the saddle. If you raise the handlebars without also reversing the stem, you will end up putting the saddle too high and it will be uncomfortable to ride.
Therefore, if you want to raise the handlebars on your Giant bike, you will need to invert the stem and then add a stem with a steeper angle. This will allow you to raise the handlebars to the desired height while keeping the saddle at a comfortable height.
Types Of Handlebars On Giant Bikes
There are two main types of handlebars on Giant bikes: drop handlebars and flat handlebars. Drop handlebars are the ones you typically see on road bikes. They are designed for aerodynamic efficiency and offer multiple hand positions.
Flat handlebars are more common on mountain and hybrid bikes. They are wider than handlebars and offer better control when riding over rough terrain.
Depending on the type of handlebars your Giant bike has, the process for raising them will be slightly different. Let’s go over both methods so you can choose the one that’s right for you.
Method 1: Raise the handlebars
If your Giant bike has handlebars, you will need to use an Allen wrench to loosen the clamp that holds the handlebars. The Allen wrench is a small L-shaped tool that is included in your bike’s tool kit.
Once the clamp is loosened, you can raise the handlebars to the desired height and then tighten the clamp to secure it in place.
Method 2: Raise the handlebars flat
If your Giant bike has flat bars, you will need to use a wrench to loosen the bolts that hold the handlebars in place. The wrench is a larger, T-shaped tool that is also included in your bike’s tool kit.
Once the bolts are loosened, you can raise the handlebars to the desired height and then tighten the bolts to secure them in place.
That’s all there is to it. By following these simple steps, you can easily raise the handlebars on your Giant bike to better suit your riding needs.
How To Raise The Handlebars On A Giant Bike?
One of the nice things about Giant bikes is that they are very adjustable to fit a wide range of riders. If you find that the handlebars on your Giant bike are too low, it’s easy to raise them to a more comfortable position.
Here’s a quick and easy guide on how to do it:
- Step 1: Gather the necessary accessories.
- Step 2: Remove the top cap
- Step 3: Loosen the stem bolt
- Step 4: Adding a handlebar riser
- Step 5: Add the spacer
- Step 6: Re-install the handlebars
- Step 7: Replace the top cap
- Step 8: Tighten all bolts and recheck for proper installation
Step 1: Gather the necessary accessories.
To raise your Giant bike’s handlebars, you’ll need a few things:
- A handlebar riser
- Spacers (optional)
Step 2: Remove the top cap
Using an Allen wrench, remove the top cap from the stem. This will expose the bolt that holds the handlebars in place.
Step 3: Loosen the stem bolt
Again, using an Allen wrench, loosen the stem bolt until it is loose enough to remove by hand. Be careful not to remove the bolt completely, as you will need it to secure the handlebars in place once you have lifted it.
Step 4: Adding a handlebar riser
If you only want to raise the handlebars a few inches, you can do so by adding a handlebar riser. Simply slide the riser over the handlebar and tighten it into place.
Step 5: Add the spacer
If you want to raise the handlebars more than a few inches, or if you don’t have a handlebar riser, you will need to add one or more spacers. Spacers are placed between the handlebars and the stem and are available in various thicknesses. Start with a few spacers about an inch thick, and then add more if needed.
Step 6: Re-install the handlebars
Once you have the spacers in place, it’s time to reinstall the handlebars. Slide the handlebar into the stem, then thread the stem bolt into place. Tighten the bolt until snug, but do not overtighten.
Step 7: Replace the top cap
Replace the top cap on the stem and tighten it in place.
Step 8: Tighten all bolts and recheck for proper installation
Finally, check all handlebar and stem bolts to make sure they are tight. Once everything is secure, test your bike to make sure the handlebars are at the proper height.
How Do You Raise The Handlebars On A Kids Giant Bike?
It’s important to make sure your child is comfortable riding a bike, and one way to do this is to adjust the handlebars. If the handlebars are too low, it can be difficult for your child to reach them and they may end up slouching.
If the handlebars are too high, it can be difficult for your child to control the bike.
Here’s a quick and easy guide on how to raise the handlebars on a giant bike for kids:
- Step 1: Unscrew the center bolt or nut a few turns
- Step 2: Pull up on the handlebars
- Step 3: Realign or rotate the handlebar stem
- Step 4: Align the bike’s handlebars with the saddle
- Step 5: Tighten the bike’s handlebars
Step 1: Unscrew the center bolt or nut a few turns
The first step is to unscrew the center bolt or nut that holds the handlebars. It only needs to be unscrewed a few turns. If the bolt is too tight, it may be difficult to remove.
Step 2: Pull up on the handlebars
Once the bolt is loosened, you can pull the handlebar up. You may have to jiggle it a little to get it to move, but do not force it.
Step 3: Realign or rotate the handlebar stem
Once the handlebars are in the desired position, you can realign or rotate the handlebar stem. This is important so that the handlebars are in the correct position and are level.
Step 4: Align the bike’s handlebars with the saddle
The next step is to align the bicycle handlebars with the saddle. This is important so that your child can reach the handlebars comfortably and is in a good riding position.
Step 5: Tighten the bike’s handlebars
Once everything is in the correct position, you can tighten the bike handlebars. Make sure the bolt is tight enough so that the handlebars don’t move, but don’t overtighten.
And that’s it. By following these simple steps, you can easily adjust the handlebars on a giant bike for kids. This will help your child feel comfortable and be able to ride their bike safely.
Raising the handlebars on a giant bike is an important part of making sure the bike fits the rider properly. A bike that is too big or too small can be uncomfortable to ride. By raising the handlebars, the rider can make the bike fit better and the ride more comfortable.